background image

Operation the system – CD/MP3

1. Switch on the system by pressing Standby button.

2. Press CD Close/Open button, CD tray will slide out.

3. Insert CD/MP3 disc into the CD tray, press Close/Open button

    again to slide in the CD tray.

4. Press CD Play/Pause button      ,  playback starts with the

    first track. The display shows current track number and its

    elapsed time.

5. To interrupt playback , press CD Play/Pause button      , the time

    elapsed indicator will flash.

6. To resume playback, press CD Play/Pause button again.

7. To stop playback, press the Stop button     .

Listen to the desired tracks

During playing CD:

1. Press Skip up or Skip down button less than 0.7 second to skip

    up or down the tracking number.

2. Press Skip up or Skip down button longer than 0.7 second to do

    fast reverse/forward playback.

3. Press Auto Tune/REPEAT button to cycle select the repeat mode:

    Repeat all     Repeat 1 track     Repeat off.

4. Press INFO/Random button to toggle between random play mode

    and normal play mode.

5. Press REMAIN button to cyclically show the following tracking

    time information:

    Normal Play mode:

    Each time     Each remain time     Total remain time

    Total time     Each time.

    Random Play mode:

    Each Time     Each remain time     Each time.

6. If your CD/MP3 has more than 10 tracks.

(1) Press 10+ button first then followed the track no.

     e.g. Track number 25: Press 10+     2     5

     Tracking number 100: Press 10+     1     0     10/0

29

20060919_DMS-16_381P501-A_GB.p65

2006/9/19, ¤W¤È 09:15

32

Summary of Contents for DMS-16



































Reviews: