40
Wake On LAN
If you use a computer as a UPnP server for playing your music files via your radio, you may not
wish to keep that computer running when you are not using the radio. If your computer is suitably
configured, it can either shut down, or enter a standby or hibernation state when it is not being
used.
Your radio can wake up a computer which has shut down using a Wake On LAN command via
the network provided that the radio has previously connected to a UPnP server application on
that computer. A computer which is not currently active will be shown with a question mark in the
list of UPnP servers.
Many computers will not respond to Wake On LAN commands from the radio in all modes, and
may require software, device driver, BIOS, hardware or router configuration changes for this
function to operate. Failure of a computer to respond to Wale On Lan is not considered a fault of
the radio.
Prune servers
Your radio stores details of the UPnP servers that it has seen via its network connection in its
internal memory. If you use the radio at different locations you may find that there are servers
listed by the radio that are no longer available. The prune servers functions allows the list to
be reinitialized so that only active UPnP servers on the currently connected network are shown
when selecting ‘Shared Media’ from the Music Player menu.
1. Press the
Menu
button to enter the main Music Player menu.
2. Rotate the
Tuning Control Rotary
until ‘Prune servers’ is highlighted on the display. Press the
control.
3. To remove servers that are no longer required rotate the
Tuning Control Rotary
until ‘Yes’
is highlighted on the display. Press the
Tuning Control Rotary
to cause the servers to be
removed.
4. If you do not wish to prune servers rotate the
Tuning Control Rotary
to highlight ‘No’ and
press the
Tuning Control Rotary
to confirm.
?DAD: LES:
?JENNY: Jenny’s music
HOME_PC: Mum’s music
Shared media
>
>
>
Music player
My Playlist
Repeat play: Off
Shuffle play: Off
Clear My playlist
Prune servers
>
Prune shared media
wake on LAN servers?
Prune invalid
Summary of Contents for Fusion WFR-30
Page 1: ...GB WFR 30 Version 1...
