Sangean PR-D12BT, Manual

05

GB

F

E

NL

D

3. 

 Make sure all batteries are inserted with correct polarity as shown in the battery compartment. Replace the battery 

cover.

When using alkaline batteries the battery switch must be placed in the alkaline 

position. Failure to do so could result in serious damage to the batteries or radio.

IMPORTANT

4. 

 Reduced power, distortion, “stuttering sound” and the symbol “E” flashing or empty battery icon flashing on the 

display are all signs that the batteries need replacing.

5. 

 If the radio is not to be used for an extended period of time, it is recommended that the batteries are removed 
from the radio.

●

If extended listening using batteries is anticipated, then the use of rechargeable batteries is recommended.

Charging the batteries

When using rechargeable batteries the battery switch must be placed in the NiMH 

position. Batteries will only be charged when the radio is switched off and connected 

to the AC adaptor.

IMPORTANT

The charge indicator will flash red indicating that batteries are charging. Batteries will be fully charged in around 4-6 

hours depending on their capacity. The charge indicator shows a steady red light when battery charging is complete.

Duration for charging your batteries fully can vary according to the mAh capacity of 

the batteries. Higher mAh batteries require a longer charging time.
During the charging process, if a battery is detected as faulty / damaged, the display 

will show the battery error icon with the corresponding battery number. 

 will flash 

on the display.

NOTE

Using the AC power adaptor

The AC power adaptor included with this unit is 9 volts DC at 0.7A center pin positive.
Insert the adaptor plug into the DC socket on the left side of the radio. Plug the adaptor into a standard AC outlet.
Whenever the adaptor is used, the batteries are automatically disconnected. The AC adaptor should be disconnected 

from the main supply when not in use.

The AC adaptor is used as the means of connecting the radio to the power supply. The AC Adapter used for the 

radio must remain accessible during normal use in order to disconnect the radio from the power supply completely. 

IMPORTANT