Sangean PR-D7, Instructions For Use Manual

12

  Setting the HWS ( Humane Wake System )

  buzzer alarm

A beep will activate when selecting the HWS alarm. The alarm

beep will increase in volume every 15 seconds for one minute

followed by one minute silence before repeating the cycle.

The HWS alarm will sound for an hour until turning off by pressing

the Power button. Press the Power button whilst the alarm is

activated will cancel the alarm for 24 hours.

1. The HWS buzzer alarm can be set either radio is on or off.

2. Press and release the HWS buzzer alarm button      ,

    the symbol          will show on the display.

3. Long press the        button for more than 2 seconds followed

    by a beep, display Hour digit will flash.

4. Pressing Tuning Up/Down button to select required alarm hour,

    then pressing        button again, the minute digit will then flash.

5. Pressing Tuning Up/Down button to select required alarm minute,

    then press        button again to complete alarm setting.

    Display will appear          when buzzer alarm has been set.

6. Press and hold down Buzzer alarm button      for more than

    2 seconds followed by a beep to switch on or off the alarm.

GB