Sangean PR-D7, Instructions For Use Manual

13

  Snooze function

1. Whilst the alarm is activated, press any buttons except the

    Power button will activate the snooze function. The radio or

    HWS buzzer alarm will be silenced with interval of 5 minutes.

2. The display will flash both the snooze symbol          and the

    alarm symbol. The snooze function can be repeatedly during the

    one hour that the alarms are active.

  Sleep function

The sleep timer will automatically switched off the radio after a

preset time has elapsed.

1. Press and continue to hold down the Power button for more than

    2 seconds, followed by a beep, the display will cycle through the

    available sleep timers in the order of 60-45-30-15-120-90-60.

    Release the Power button when the required sleep timer

    appears in the display. The          symbol will appear in the

    display and the radio will play the last station selected.

2. To cancel the sleep function, press the Power button.

    The          symbol will disappear and radio is off.

  Display backlight

Press any buttons will illuminate the LCD display for approx.

15 seconds. During scanning stations and alarm activated will also

automatically illuminate the display.