8
GB
6
2
5
5
3,4
Operating your radio - Search tuning AM / FM
. Fully extend the antenna above the radio. Press the Standby button
to switch on your radio.
2. Press the Band button to select the required band.
3. Press the Scan button to start the search tuning. Your radio will scan
in an upwards direction (low frequency to high frequency) and stop
automatically when it finds a station of sufficient strength.
4. Press the Scan button or any other buttons (not included the Standby
button) to stop the search tuning and you can listen to your desired
station.
5. To find other stations, press and release the Tuning Up / Down buttons
as before.
6. Adjust the volume control by pressing the Volume up/down button to
the required setting.
