32
GB
Press the
Tuning
buttons until 'Shared media' is highlighted and press the
Select button
to
select. The radio will scan for all available UPnP servers. It may take a few seconds for the
radio to complete its scan. The radio will display '<Empty>' if no UPnP servers are found.
After scanning, select your UPnP server on the panel. If you allowed automatic connection
previously, your radio should now connect and you may skip to the next page. If you did not
permit automatic connections, your radio will then normally display 'Unauthorized' at this
stage.
Your PC may prompt you that there has been a connection to your UPnP server. Whether
prompted or not, in order that the radio may access the music
files,
you will need to click the
'Library' tab in WMP 12 and select the 'Stream...' item to open the 'Media Streaming' window.
Select 'Automatically allow devices to play my media' then select 'Automatically allow all
computer and media devices'. Alternatively select 'More Streaming options' to enable sharing
on a 'per device' basis.
In the 'More streaming options' window, the radio will be listed as a blocked device. Click on
the button shown to select 'Allowed'.
Note:
If you are using Microsoft Windows'
firewall
software, this should be correctly
configured
by
WMP 12. If you are using third party
firewall
software you may need to manually
configure
it to
allow your unit and WMP 12 to communicate.
On the radio, select the
named server
again. If WMP 12 is now able to communicate with
your radio you will be presented with some media selection options on the display.
4.
5.
6.
7.
8.