51
Dynamic Range Control setting
Dynamic Range Control (also known as DRC) can make quieter sounds easier to hear when
your radio is used in a noisy environment by reducing the dynamic range of the audio signal.
. Press the
Standby
button to switch on your radio.
. Press and hold the
Mode
button and press the
Tuning
buttons as needed to highlight DAB
radio mode. Press the
Select
button to select the option.
. Press and hold the
Menu
button to enter the DAB menu.
. Press the
Tuning
buttons
until 'DRC' is highlighted on the display.
5. Press the
Select button
to enter the DRC adjustment mode. The current DRC setting will be
indicated with an asterisk.
6. Press the
Tuning
buttons to highlight the required DRC setting (the default is Off).
'DRC Off' - DRC is switched off, Broadcast DRC will be ignored.
'DRC high' - DRC is set as sent by broadcaster.
'DRC low' - DRC level is set to 1/2 that sent by broadcaster.
7. Press the
Select button
to confirm the setting.
Note:
Not all DAB broadcasts use the DRC function. If the broadcast does not provide DRC
information, then the DRC setting in the radio will have no effect.