57
Stereo/Mono switching
If the FM radio station being listened to has a weak signal, some hiss may be audible. It is
possible to reduce this hiss by forcing the radio to play the station in mono rather than stereo.
. Press the
Mode
button. Press the Tuning buttons and press the Select button to select the
FM radio mode display and tune to the required FM station as previously described.
. Press and hold the
Menu
button to enter the FM menu.
. Press the Tuning buttons until 'Audio setting' is highlighted on the display. Press the
Select button
to enter the audio setting mode. The current setting is indicated with an asterisk.
4. To switch to mono in order to reduce the hiss from a weak FM signal press the Tuning buttons
until 'YES' is highlighted. Press the
Select button
to confirm the setting.
Alternatively, to return to the normal automatic 'stereo or mono' mode press the
Tuning buttons
until 'NO' is highlighted. Press the
Select button
to confirm the setting.