63
Clock and Alarms
Automatically updating the clock
Your radio will normally update the clock automatically when connected to the internet. If you
enter a time setting manually, the radio will calculate a local time offset which is then stored in
memory. Whenever it synchronizes the clock using the internet, including after a power failure,
your radio will then set the clock automatically using this information.
You may wish to use the radio away from the internet, in which case you may specify that the
unit sets its clock from DAB or FM radio broadcasts.
After a power failure the radio will then set its clock the next time that you turn on the radio in
DAB or FM mode. Alternatively you may specify that the time is not automatically updated. In this
case the clock must always be set manually after a power interruption.
. With your radio switched on, press and hold the
Menu
button to access the menu for the current
mode.
. Press the Tuning buttons until 'System settings' is highlighted on the display. Press the
Select
button
to enter the system settings menu.
3. Press the Tuning buttons until 'Time/Date' is highlighted on the display. Press the
Select button
to enter the time setup.
. Press the Tuning buttons until 'Auto update' is highlighted on the display. Press
Select button
to enter the auto-update menu.
5. Press the Tuning buttons to choose an update option from 'Update from DAB', 'Update from FM',
'Update from Network' or 'No update' as required. Press the
Select button
to confirm your choice.
The radio will then exit to the previous menu display.