69
Setting the alarm clock - cont.
0.
.
Press the Tuning button until the 'Volume:' option is highlighted on the display and press
the
Select button
if you wish to change it. The radio uses the saved volume setting for
each alarm when it sounds. Set the required volume using the
Select button
to confirm the
setting.
In order to store the alarm settings Press the Tuning button until 'Save' is highlighted. Press
the
Select button
to store the alarm settings. Your radio will show 'Alarm saved' and will then
go back to the list of alarms with the new alarm setting shown in the display. If you decide
not to save the settings, press the
Back
button. The display will show 'Save changes' with
a 'YES' or 'NO' option. Press the Tuning buttons to choose 'NO' and then press the
Select
button
. 'Alarm not saved' will show on the display. Active alarms are shown using small alarm
indicators at the bottom of the playing displays and on the clock display when in standby.
Note:
If you make a mistake at any point while setting the alarms, use the Back button to go back
to the previous screen.