76
GB
Information
Factory reset
If you wish to completely reset your radio to its initial state this may be performed by following
this procedure. By performing a factory reset, all user entered settings will be erased.
1. Access the menu for the current mode by pressing and holding the
Menu
button. Press the
Tuning buttons to highlight the 'Main menu' option, then press the
Select button
to confirm.
2. Press the Tuning buttons until 'System settings' is highlighted and then press the
Select button
to confirm the setting.
3. Press the Tuning buttons
until 'Factory Reset' is highlighted and then press the
Select button
to
confirm
the setting. Press the Tuning buttons to highlight 'YES' to proceed. If you do not wish
to carry out a system reset, highlight 'NO' and then press the
Select button
to con
fi
rm the
setting. The display will revert to the previous menu.
4. With 'YES' highlighted, a full reset will be performed and the radio will restart as if
firs
t plugged
in. The DAB stations list together with any preset stations will be erased and your wireless
network connection details will be lost. All con
fi
guration settings will be restored to their defaults,
the clock and alarms will be reset.
In case of malfunction for any reason, reset the product as described above to resume normal
operation. It may be necessary in some cases to disconnect the mains power, then reconnect
power after 10 seconds. In case of malfunction due to electrical fast transient (burst), reset
the product as above (reconnection of the power source may be required) to resume normal
operation.