78
GB
Network profiles
Each time that you connect your radio to a WiFi network, the radio will store the details of that
connection (SSID, security key, DHCP/IP address settings) as a profile. Up to four such profiles
are stored in the radio so that if the unit is used in multiple locations there is no need to enter the
network settings when returning to a location previously visited.
The radios stores the four most recent profiles in memory identified by their SSID. Normally the
radio will attempt to connect to one of the stored profiles and only if it is unable to do so will you
need to use the Network Wizard.
In the event that you visit a location only once you may wish to delete the profile for the network
in that location to avoid losing other profiles.
. Access the menu for the current mode by pressing and holding the
Menu
button. Press the
Tuning buttons until 'System settings' is highlighted on the display. Press the
Select button
to
enter the settings menu.
. Press the Tuning buttons until 'Network' is highlighted on the display. Press the
Select button
to enter the Network settings menu.
3. Press the Tuning buttons until 'Network profile' is highlighted on the display. Press the
Select
button
to see the stored profiles. The profile which is currently in use (if any) is marked with
an asterisk.
4. To remove a profile from memory, Press the Tuning buttons to highlight the profile to be deleted
and then press the
Select button
to confirm the setting.
5. The radio will offer a 'YES' or 'NO' selection. Press the Tuning buttons to select 'YES' and then
press the
Select button
to confirm the setting. The selected profile will be deleted.
Note:
that it is not possible to delete a profile which is currently in use.