Sangean U-1, Manual

9

  Headphones socket

You can use a stereo or mono headphones set with a 3.5 mm plug

for listening radio program via headphones. When you insert the

headphones plug, the speaker is disconnected. This is a mono type

radio, sound from the headphones set will be all in mono even if you

apply a stereo headphones set.

  AUX IN socket

Switch the Band selector to AUX. position, the Aux. band indicator is

lit on. Connect a stereo or mono audio source ( like CD walkman ) to

this input to listen the audio program via the speaker.

  Microphone IN socket

Switch the Power/Band selector to either AM or FM or AUX. position.

Connect wired microphone and adjust Volume Control, Microphone

LED indicator is lighted on, the radio can act as microphone system.

All the other audio program will be disconnected once microphone is

plugged into the socket. The microphone used should be dynamic

microphone with a 6.5 mm in diameter plug in jack.

  LED Illuminator

You can press and release the LED illuminator switch to give signal.

If press harder and release, the LED illuminator is lit on for

illumination purpose. Press the switch harder again to turn off the

LED illuminator.