Sangean WR-11BT, Safety Instructions

7

   Pairing your Bluetooth device for the first time

. Rotate the Band selecting rotary to select Bluetooth function.

The Bluetooth icon on the panel will flash.  

2. Activate Bluetooth on your device according to the device's user 

    manual to link to your WR-BT. With some mobiles which

    are equipped with earlier versions than BT2. Bluetooth device,

    you may need to input the pass code “0000”.  

3. Once connected, there will be a beep sound and the Bluetooth

    icon will remain illuminated. You can now play the music in your

    Bluetooth-enabled device via WR-BT. 

Note:

1) If there are 2 Bluetooth devices searching for WR-11BT, it will

    show its availability on both devices. However, if one device links

    with the WR-BT first, then the other Bluetooth device won't

find the WR-11BT on its list. 

2) If your Bluetooth-enabled device is temporarily disconnected to

    your WR-BT. As long as the disconnection last within  minutes,

    your device can re-connect with your radio again automatically.

    If the disconnection last more than  minutes, then you need to

    manually reconnect your device again to the radio. Be aware 

    that during the period of disconnection, no other Bluetooth device

    can pair or link with your radio.  

3) If ‘SANGEAN WR-11BT’ shows in your Bluetooth device list but

your device cannot connect with it, please delete the Sangean

    WR-BT item from your list and pair the device with WR-BT

    again following the steps described previously.

4) The effective operation range between the system and the

paired device is approximately 10 meters (30 feet).

5) Any obstacle between the system and the device can reduce the

    operational range.