A) Ensure you are grounded.
(i.e., Touch unpainted metal to avoid
destroying a computer with electrostatic
discharge, work on non-carpeted areas, etc.)
B) Carefully remove card and components from packaging.
Additional cards and components may be purchased separately.
Install your choice of supported software.
(e.g., Asterisk
®
, FreeSWITCH, Yate, CallWeaver, Netborder™, ResponsePoint™, etc.)
See the list of compatible software at:
http://www.sangoma.com/products_and_solutions/compatible_software
Thank you for purchasing the Sangoma A500 BRI card!
Please follow these instructions to begin using your new card.
2. INSTALL YOUR HARDWARE
1. INSTALL YOUR PBX SOFTWARE
Server
A500 2-24 Port Scalable S/T BRI
Full product specifications available at SANGOMA.COM
O
N
1
2
SW5
O
N
1
2
SW6
O
N
1
2
SW3
O
N
1
2
SW4
O
N
1
2
SW1
O
N
1
2
SW2
Red =
TE Mode
Green =
NT Mode
TE MODE
NT MODE
Termination
Resistors
TE = Off
NT = On
Optional Echo
Cancellation Module
Power Feeder
for NT mode**
A500 BRI Card
Module(s)
Y-cable(s)
Molex Power
Connector*
Full-height Bracket
Optional half-height
bracket included
