A) Ensure you are grounded.
(i.e., Touch unpainted metal to avoid destroying a computer
with electrostatic discharge, work on non-carpeted areas, etc.)
B) Carefully remove card and components from packaging.
Install your choice of supported software.
(e.g., Asterisk
®
, FreeSWITCH, Yate, CallWeaver, etc.)
See the list of compatible software at:
http://www.sangoma.com/products_and_solutions/compatible_software
Thank you for purchasing the Sangoma B700 FlexBRI card!
Please follow these instructions to begin using your new card.
2. INSTALL YOUR HARDWARE
1. INSTALL YOUR PBX SOFTWARE
Server
B700 FlexBRI
Full product specifications available at SANGOMA.COM
BRI Module(s)
Y-cable(s)
Red =
TE Mode
Green =
NT Mode
TE MODE
NT MODE
Analog Module
or
FXO
FXO-2
FXS
TE MODE
NT MODE
FXO-2
> B R I <
> B R I <
> F X O / F X S <
O
N
1
2
SW3
D2
D1
D3
D4
D5
D6
O
N
1
2
SW4
O
N
1
2
SW1
O
N
1
2
SW2
Termination
Resistors
TE = Off
NT = On
Power Feeder
for NT mode**
B700 BRI Card
Molex Power
Connector*
Full-height Bracket
Optional half-height
bracket included
Optional Echo
Cancellation Module
Jumper Pins
†
