19
2.
Enter the number to transfer the call to. In the
next step, you will be placing a call to this
recipient while the caller is still on hold.
3.
Press
#
or the
Send
soft key.
4.
Speak with the recipient, if able, then either
complete the transfer or cancel it:
a.
To complete the transfer:
Press
the
(transfer) button or the
Transfer
soft
key.
b.
To cancel the transfer:
Press the
Cancel
soft
key.
i.
You will be taken to a screen showing that the
inbound call is still on hold. At this point, you can
either press the
Transfer
soft key to keep the
caller on hold and dial a new recipient, or press
the
Resume
key to speak to the caller.
Paging & Intercom Module
What is the Paging & Intercom used for?
The Paging & Intercom Module is used to set-up an
extension number that your users can dial in order to
place an intercom call to multiple phones on your
system at the same time.
For example, in a small office you might set-up a Page
Group with extension number "00." When 00 is dialed
by a local user, all of the phones in the office would go
off-hook, and you could speak to everyone at every
extension at the same time. Alternatively, you could
set-up Page Groups with different extension numbers
for each department in the office, i.e. 100 for Sales,
110 for Service, and so on.
To Page throughout the Office.
Take handset off hook; or
