manualshive.com logo in svg

Sanijet PIPELESS SSB2-S115-XX, Owner'S Manual

The Sanijet PIPELESS SSB2-S115-XX is a cutting-edge, high-performance spa system designed to provide an unmatched relaxation experience. To ensure hassle-free maintenance and operation, we offer a comprehensive Owner's Manual. You can easily download this manual for free from our website, making it convenient to maximize the benefits of your Sanijet spa system.

Share
Download
background image

9

Operating Instructions

1.  After the pedicure bath has been properly installed, fill the unit with water, at the desired temperature, 1 in (3 cm) above 

the jets.

2.  Verify that the unit’s electrical cord is connected to a GFCI protected electrical outlet.

3.  To start or stop this appliance turn the dial switch to the ON or OFF position.

4.  Bath additives , including oil based products , can be used in a SANIJET Pipeless™ Pedicure Bath, since their residue can 

be easily cleaned. CAUTION: Use only low foaming additives, and do not use products that contain sand or silicates.

5.  You should always be in a seated position when placing your feet into or removing them from the pedicure bath.
  WARNING: NEVER STAND IN THE PEDICURE BATH BASIN.

Quarter-turn Counter Clockwise

Summary of Contents for PIPELESS SSB2-S115-XX

















Reviews:

No comments

Related manuals for PIPELESS SSB2-S115-XX

Brands by name

Popular brands

Load more brands