SERVICE
+
Have your Sanique sprayer serviced by a qualified repair person using only identical
replacement parts.
This will ensure that the safety of the sprayer is maintained.
If the supply cord of your Sanique sprayer is damaged it must be replaced by a
specially prepared cord available through the service organization.
SPECIFIC SAFETY RULES
WARNING: HIGH PRESSURE
Never leave pressurized system unattended. Take precautions to avoid high
pressure component rupture.
WARNING: FIRE AND EXPLOSION HAZARD
Take all precautions to avoid sources of sparks and ignition when spraying.
WEAR PROTECTIVE EQUIPMENT AT ALL TIMES
Always use a respirator, eye protection and protective clothing. Keep clear of
moving parts when starting or operating the sprayer. Do not put your fingers
into any openings to avoid amputation by moving parts or burns on hot parts.
When starting the motor, maintain a safe distance from moving parts of the
equipment.
EXPLOSION RISK FROM HALOGENATED HYDROCARBON SOLVENTS
Never use halogenated hydrocarbon solvents in this machine.
Contact with aluminum parts may cause an explosion.
Some of the most common of these solvents are:
Carbon tetrachloride
Chlorobenzene
Dichloroethane
Dichloroethyl Ether
Ethyl bromide
Ethyl chloride
Tetrachloroethane
7
