E
N
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING YOUR COMMERCIAL FLOOR MACHINE
When using an electrical appliance, basic precautions should be observed, including the following:
TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK OR INJURY:
» Do not immerse.
» Use only on surfaces moistened by cleaning
process.
» Always connect to a properly grounded outlet.
» See grounding instructions.
» Unplug from outlet when not in use and
before conducting maintenance or
troubleshooting.
» Do not leave machine when it is plugged in.
» Do not service machine when it is plugged in.
» Do not use with damaged cord or plug.
» If appliance is not working as it should, has
been dropped, damaged, left outdoors, or
dropped into water, have it repaired at an
authorized service center.
» Use indoors only.
» Do not pull or carry by cord, use cord as a
handle, close door on cord, pull cord around
sharp corners or edges, run appliance over
cord, or expose cord to heated surfaces.
» Unplug by grasping the plug, not the cord.
» Do not handle plug or appliance with wet
hands.
» Do not put any object into appliance
openings, use with blocked opening or
restrict air flow.
» Do not expose hair, loose clothing, fingers, or
other body parts to openings or moving parts.
» Do not use appliance in an enclosed space
filled with vapors given off by oil-based paint,
paint thinner, some moth-proofing
substances, flammable dust, or other
explosive or toxic vapors.
» Do not modify the 3-prong grounded plug.
» Do not allow to be used as a toy.
» Do not use for any purpose other than
described in this user guide.
» Do not unplug by pulling on the cord.
» Keep openings free of dust, lint, hair, etc.
» Keep appliance on a level surface.
» Turn OFF all controls before unplugging.
» Close attention is necessary when used by
or near other people.
WARNING
SAVE THESE INSTRUCTIONS
THIS MODEL IS FOR COMMERCIAL USE
WARNING
2 www.sanitairecommercial.com
Improper connection of the equipment-grounding conductor
can result in a risk of electrical shock. Check with a qualified
electrician or service person if you aren’t sure if the outlet
is properly grounded. DO NOT MODIFY THE PLUG. If it
will not fit the outlet, have a proper outlet installed by a
qualified electrician. This appliance is designed for use on
a nominal 120-volt circuit, and has a grounding attachment
plug that looks like the plug in the drawing to the right. Make
certain that the appliance is connected to an outlet having
the same configuration as the plug. No plug adapter should
be used with this appliance.
GROUNDING INSTRUCTIONS
This appliance must be connected to a grounded wiring
system. If it should malfunction or break down, grounding
provides a safe path of least resistance for electrical
current, reducing the risk of electrical shock. The cord for
this appliance has an
equipment-grounding
conductor and a grounding
plug. It must only be plugged
into an outlet that is properly
installed and grounded in
accordance with all local
codes and ordinances.
!
FlrMachineOG_1618912.qxp_FloorMachine 3/22/19 1:59 PM Page 2
