8 www.sanitairecommercial.com
E
N
TRANSPORTING THE
FLOOR MACHINE
MAINTENANCE GUIDE
Once a month remove the motor cover and
vacuum out any dust or debris which has
accumulated on the motor.
Replace the motor cover by setting it over
the holes in the housing and replace all of
the screws. Check and maintain the
tightness of all the fasteners.
WARNING:
Do not over-tighten the switch
housing screws.
Keep the machine clean, especially at the
handle tube and collar so the handle tube
will move freely through the collar. Inspect
the power cord for cuts, gashes, or loose
prongs; replace as needed.
NOTE:
Disassembly of this motor voids the
warranty. Improper disassembly and
assembly of this motor can permanently
damage the field or rotor.
1. Place the handle in the upright
position.
2. Lock the handle cam release lever.
3. Tip the machine back and transport
on the wheels.
FlrMachineOG_1618912.qxp_FloorMachine 3/22/19 1:59 PM Page 8
