9
ROUTINE MAINTENANCE INSTRUCTIONS
TROUBLESHOOTING
LOSS OF VACUUM SUCTION
CAUSE:
1) Vacuum inlet blocked
2) Defective motor
SOLUTION:
1) Visually inspect and clear blockage
2) Replace motor
After each use, carefully wrap power cord around the handle and check cord for wear or damage. If
cord is damaged have the cord replaced by an authorized service center immediately.
THE BRUSH DOES NOT ROTATE
THE MACHINE DOES NOT TURN ON
CAUSE:
1) The circuit breaker has tripped
2) Plug is broken or has loose contact
3) Branch circuit breaker has tripped
SOLUTION:
1) Reset circuit breaker
2) Replace cord
3) Find circuit breaker box and reset
CAUSE:
1) Broken brush belt
2) Brush obstruction
SOLUTION:
1) Replace belt
2) Clear obstruction
UNIT DOES NOT PICK UP
CAUSE:
1) Strings/threads wrapped around brush
2) Brush obstruction
SOLUTION:
1) Remove strings/threads
2) Clear obstruction
