4 www.sanitairecommercial.com
EN
Before you Clean
1.
Remove loose dirt and impediments before
deep cleaning.
2.
Pretreating (optional):
a.
Pretreating is recommended to improve
cleaning effectiveness for heavily soiled
carpet in high traffic areas such as
entryway and hallways.
b. Sanitaire
®
Stain Pretreat
Spray any Sanitaire Stain Pretreat formula
onto heavy traffic areas, soiled areas or
stains. Allow to penetrate for at least 3
minutes Clean as normal, following the
instructions below.
Preparing the Machine
1.
Release Flex Hose by twisting the hose
secure latch clockwise. Unwrap Flex Hose
completely.
2.
Attach the Large Stain Tool to the hose grip
until it snaps together. Make certain the tool is
securely attached.
3.
Twist the Quick Release™ Cord Wrap
clockwise to unwrap the Power Cord
completely and plug into grounded outlet.
Filling the Formula & Clean
Water Tank
1.
Remove tank from the back of the machine by
lifting up tank carry handle.
Note: This tank was designed with a
flat bottom so it can be easily filled.
2.
Unscrew the black cap and remove bottle
insert.
3.
Fill tank with hot tap water (140° F/60° C
MAX) to the water fill line. Add 60 mL/2 oz
of Sanitaire 2X
®
formula to the tank.
4.
Replace the bottle insert in the tank and
tighten the black cap. Replace the tank on the
machine.
1.
2.
Operations
NOTICE
Some Berber carpets have a tendency to
fuzz with wear. Repeated strokes in the
same area may aggravate this condition.
TIP:
Make only one trip to
the sink by bringing the entire
portable cleaner. Fill and
empty in the same trip.
