6 www.sanitairecommercial.com
EN
2.
3.
4.
5.
Maintenance & Care
Empty Dirty Water Tank
1.
When the Dirty Water Tank reaches the “FULL”
line on the tank it is time to empty.
2.
Remove tank and carry to a utility sink, toilet
or outside (where you will dispose of the dirty
water).
3.
To unlock the tank's lid, rotate handle over the
back of the tank. Remove lid and pour out dirty
water. Rinse out tank to remove any debris.
4.
Replace top of tank, and rotate the handle
forward to lock in place on front of tank.
5.
Before replacing tank on machine, wipe debris
off red filter.
Cleaning your Machine
1.
Remove and rinse the tools under clean,
running water. Allow tools to dry.
2.
It is recommended that you suction clean water
from a bowl to rinse out the hose. Then lift end
of hose and stretch out to ensure all water is
cleared from hose.
3.
Wrap the Flex Hose around the hose wrap and
secure with latch.
Caring for your Machine
Cleaning Debris Filter
1.
Remove all hair and debris from the red filter.
2.
Place the Dirty Water Tank back onto the
machine.
Machine Storage
Store machine in a protected dry area.
Debris
Filter
WARNING
To reduce the risk of fire, electric shock or
injury, turn power OFF and disconnect plug
from electrical outlet before performing
maintenance or troubleshooting.
NOTICE
To reduce the risk of a leaking condition,
do not store unit where freezing may
occur. Damage to internal components
may result.
TIP:
For best results empty,
rinse and dry tanks and tools
before storing.
