www.sanitairecommercial.com 7
EN
Troubleshooting
Problem
Possible causes
Remedies
Reduced
spray or
no spray
Formula and Clean Water Tank
may be empty
Refill tank
Formula and Clean Water Tank
may not be seated completely
Turn power OFF; Remove and
reseat tank
Pump may have lost prime
Hold end of hose below water
level in tank to prime
Loss of
suction
power
Tanks may not be seated
properly
Pick up both tanks and reseat them
so they fit snuggly on the unit
Dirty Water Tank has picked up
maximum amount of dirty water
and has reached full line
Empty tank
Formula and Clean Water Tank
is empty
Check fluid levels in tank
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from electrical outlet before performing
maintenance or troubleshooting.