16
No measurement possible
Possible errors
Remedy
The scale was not activated before being
stepped on. If you step onto the scale before
„0.0“ appears in the display,
it will not function correctly.
Activate the scale correctly (wait for „0.0“)
and repeat the measurement.
Switch on the control panel and the scale before the
measurement.
If necessary, wait 30 seconds and then repeat the
measurement.
Interference between scale and
control panel.
Remove and replace the batteries in the scale and
control panel or make sure that the transmitter and
receiver are not covered.
The control panel is too far from the scale.
Reduce the distance between the scale and control
panel.
The scale batteries are flat.
Replace the batteries (see page 14).
The connection between control panel and scale
is interrupted.
Do not cover the receiver and transmitter.
Incorrect weight measurement
Possible errors
Remedy
Scale is on carpet.
Place scale on a flat, solid surface.
Scale zero setting is incorrect.
Switch on scale and wait until it switches off auto-
matically (LED off). Then repeat measurement.
13. technical specifications
Scale batteries
4 x 1.5 V AAA
Control unit batteries
2 x CR2032 lithium batteries
Measuring range
1 kg to 150 kg
Weight
100 g
Transmission
Infrared transmission
Subject to technical modifications.
