4
□
When using in a high or inclined position:
FOR YOUR SAFE USAGE
CAUTION :
Improper handling of the conveyor may result in physical injury or damage!
■
Transport and assembly
When transporting and assembling the conveyor, pay special attention not to drop it in order to
avoid physical injury or damage. When lifting by crane, pay attention to the balance of the conveyor.
■
Earth and leakage breaker
Ensure the conveyor is connected to earth at all times to prevent electric shock. Also ensure that
an earth leakage breaker is connected to the power supply.
A.
Prior To Use
■
Emergency stop
Install an emergency stop device to immediately stop the conveyor in emergency.
■
Start alarm
If it is not possible to supervise the operation of the full length of the conveyor from the operating
position, install a start alarm for increased safety.
■
Keep the conveyor dry at all times
Do NOT use the conveyor in wet or humid areas. Do NOT splash liquids onto the conveyor. Do
NOT use or leave the conveyor outdoors. The machine is not waterproof. Do NOT touch electrical
parts with wet hands.
■
Do NOT use in an explosive atmosphere
(Avoid explosive gas, explosive dust, etc.)
■
Lower cover and guard
Install the optional lower cover or guard in order to prevent entry under the conveyor.
■
Guide rail, top and side covers
To prevent objects from falling off the conveyor, install the optional guide rail, top and/or side
covers.
■
Braking system
When using the conveyor on an incline, it is recommended that an optional braking system be
installed, in order to prevent reverse or other incorrect running of the conveyor.
■
Environmental conditions
Ambient temperature
Ambient humidity
Atmosphere
Elevation
NOTE
：
●
Using the conveyor in a strong electric field (eg near broadcasting devices or high- frequency welding
machinery/equipment) could cause the conveyor to malfunction. In this case, install the conveyor at a
sufficient distance. Alternatively shield completely to avoid any interference with the conveyor.
●
Using an inverter to this machine could cause other machines to get effects of high-frequency. In this
case, install the conveyor at a sufficient distance or shield completely.
1
CAUTION WHEN HANDLING
：0℃ to +40℃
：
RH 85% max(Avoid condensation)
：
Indoor(Avoid corrosive gases, dust, etc.)
：
1,000m or less
