Error
number
(1) Error description
(2) Error detail
(3) Check contents
E27
1. Middle press speed error
2. Sensor turns on within 0.60 second after middle press goes down.
3. (1) Check the air manometer shows (0.6MPa) and adjustment air. (Refer to 16page)
(2) Turn speed controller on the side of the middle press cylinder head side clockwise to adjust the
speed. If not change occurs check the speed controller and if necessary replace the controller.
E28
1. Upper press speed error
2. Sensor turns on within 0.70 second after upper press goes down.
3. (1) Check the air manometer shows (0.6MPa) and adjustment air. (Refer to 16page)
(2) Turn speed controller on the side of the middle press cylinder head side clockwise to adjust the
speed. If not change occurs check the speed controller and if necessary replace the controller.
E98
1. Display board external input error
From software version 2.02 onward
2. Input of the display board failed to work properly.
3. (1) Confirm whether or not the entry connector doesn't have a malfunction by the display board.
(2) Confirm whether or not there is not garbage on the display board. Clean a board by air blow-
dry and so on.
(3) It is necessary to exchange a display substrate when not improved even if it does (1),(2).
E99
1. 24V Error
2. Either safety bar operated in an instant in the vibration and so on.
3. The error will be released when you press the reset button.
When occurring many times, adjust a speed controller at the part where the impact is big.
EC1
1. Warning for cover change timing.(Standard)
2. Time to change covers. You have done 10,000 presses/finishes since last time.
3. Press and hold Reset Button for more than 1 second. Error message will be cancelled. After
cover change, be sure to reset the cover counter referring to "Cover Counter" of page 20.
31
Summary of Contents for LP-660E-V2
