10 / Opera
tor’s Manual Sanli GT26
3.1
Preparation of the petrol trimmer
WARNING:
Do not use the edge trimmer unless it is fully assembled!
3.
11 Setting up the petrol trimmer
Unpack all the parts carefully and make sure that there are no parts
missing. Make sure that all parts function properly.
Fix the lower handle to the tube by positioning it under the main handle
according to your height, and fix it in place by screwing the four fixing
screws (fig. 1).
WARNING:
Check that the lower handle is installed properly, with the safety arm
facing your legs. For a right-handed person, the safety arm will be installed
toward the left; for a left-handed person, the safety arm will be towards the
right.
Assemble the whole of the deflector-cutting
spool at the end of the tool’s tube, as shown
in figure 2, making sure that the flexible
transmission inside the tube is properly
inserted into the support square of the spool.
Screw in the two fixing screws according to
their length, checking that the metallic guide
is attached, as shown in figure 3.
Fix the deflector with the long screw and the
wing nut as shown in figure 4.
Metallic guide Long screw
Wing nut
Fixing screw
Summary of Contents for GT 26
Page 1: ...PLEASE KEEP THIS MANUAL IN A SAFE PLACE Petrol Trimmer www sanli co uk...
Page 25: ...Operator s Manual Sanli GT26 25 Engine powered generators...
Page 26: ...26 Operator s Manual Sanli GT26 Notes...
Page 27: ...SANLI UK LTD Unit 200 Milton Park Estate Abingdon Oxfordshire OX14 4TB www sanli co uk...
