14 / Opera
tor’s Manual Sanli GT26
3.24 Advice for cutting
Cut the grass by swinging the tool from left to right and progress slowly in
this way, maintaining the cutting deflector horizontal and parallel to the
ground. Light cutting is preferable to heavy cutting as it allows the grass to
be projected far from the spool, stopping it from becoming clogged.
To cut tall grass, proceed in steps, from the top to the root of the grass.
Never cut damp grass. Do not overwork the tool.
Avoid using up the line too quickly by hitting hard objects (stones, walls,
barriers, etc.).
Be very careful of the tool kicking back when it hits hard objects.
NOTE: Regularly remove cut grass that has accumulated between the spool and
the edge of the deflector to stop the tool vibrating.
3.25 Changing the nylon line
Before adjusting the thermal edge trimmer, stop the engine and wait for
the tool to stop completely.
Find two clips on the spool box which hold the lid down. Press with your
thumb and index finger on both clips and free the spool access lid (fig. 7
and 8).
Remove the spool (fig. 9).
Repeat the operations in reverse to fix a full spool, without forgetting to
feed the two wires into their metallic passage. Make sure the lid is
properly closed.
Summary of Contents for GT 26
Page 1: ...PLEASE KEEP THIS MANUAL IN A SAFE PLACE Petrol Trimmer www sanli co uk...
Page 25: ...Operator s Manual Sanli GT26 25 Engine powered generators...
Page 26: ...26 Operator s Manual Sanli GT26 Notes...
Page 27: ...SANLI UK LTD Unit 200 Milton Park Estate Abingdon Oxfordshire OX14 4TB www sanli co uk...
