Operator’s Manual Sanli GT26 / 15
3.3
Cleaning, storage, transport and maintenance
Before attempting any maintenance or adjustment of the thermal edge
trimmer, stop the engine
3.31 Cleaning the petrol trimmer
Cleaning the tool after every time it is used ensures that the tool works
better and has a longer period of useful life.
Clean the surface of the tool with a soft damp cloth. Never clean the
plastic with a chemical product that could damage it.
WARNING:
Never immerse the trimmer in water or in other liquids to clean it.
Never clean the tool with a strong water jet or high-pressure water.
3.32 Storing and transporting the petrol trimmer
Be sure that the tool is stored safely and that it is stored out of reach of
children
Store the machine in a cool, dry place, away from sunlight. Covering the
tool with a tarpaulin is not recommended as this could cause an damp to
accumulate on the tool.
For long-term storage, empty the petrol in the tank in a container and let
the engine cut out as it runs out of petrol the last time you use it.
3.33 Transporting and maintaining the thermal edge trimmer
Only transport the trimmer when it is switched off.
Lubrication of the transmission
Lubricate the transmission every 25 hours or once a year. Dismount the support
of the wire spool and apply some grease both at the bottom of the tube and in
the moving section of the spool support (see section 3.11 Setting up the thermal
edge trimmer, page 10).
Air filter
Remove the air filter lid (component 11).
Summary of Contents for GT 26
Page 1: ...PLEASE KEEP THIS MANUAL IN A SAFE PLACE Petrol Trimmer www sanli co uk...
Page 25: ...Operator s Manual Sanli GT26 25 Engine powered generators...
Page 26: ...26 Operator s Manual Sanli GT26 Notes...
Page 27: ...SANLI UK LTD Unit 200 Milton Park Estate Abingdon Oxfordshire OX14 4TB www sanli co uk...
