Sanli Blower / Blower Vac User Guide
5
Tips on Blower / Blower Vac safety.
WARNING!
The information contained within this safety section is
extremely important. Personal injury to the user and to others may
result if this section is not read and acted upon at all times.
1. Before starting your Blower / Blower Vac inspect it carefully to ensure that there
are no loose parts and that it is in good working order.
2. Be sure of your footing. Always walk, never run, when operating the Blower /
Blower Vac.
3. Be aware that the machine’s exhaust area and other parts of the Blower / Blower
Vac get very hot during, and right after use.
4. Turn off the engine and disconnect the spark plug cap before cleaning,
transporting or making adjustments.
5. We recommend you avoid operating the unit when it is raining, or after nightfall.
6. Do not fill the tank, or start the Blower / Blower Vac indoors, or in a poorly
ventilated area, as exhaust gases contain poisonous substances and petrol fumes
are flammable and dangerous.
7. Never open the fuel filler cap, or fill the tank while engine is running or if the engine
is still hot after use. And please ensure that you securely tighten the petrol cap
after filling.
8. Do not transport the Blower / Blower Vac in a vehicle if there is any petrol in the
tank.
9. Store fuel and oil in a cool well-ventilated place, away from direct sunlight and not
near gas cylinders or hot water heater systems.
10. Do not smoke when filling the fuel tank, using the machine, or when petrol is in
the immediate area. And never use or store the Blower / Blower Vac near a naked
flame.
11. Sanli recommends that you wear ear protectors, safety goggles and safety boots
when using a Blower / Blower Vac.
12. All servicing and repair work under warranty must be carried out by an Authorised
Sanli Dealer, otherwise the 12 month warranty may be void.