Sanli Self-Propelled 4-in-1 User Guide
15
5. Blades and cutting system.
Extreme care should be taken with blades.
Ensure the mower is off and the spark plug
lead is disconnected from the spark plug, to
prevent accidental ignition.
Remove the catcher or mulching plug, set the
cutting height lever to the highest level, and
then hold up the rear flap in order to inspect
your blades (see fig. 25). Check every few
months to make sure they are not damaged,
loose, or overly worn. If loose, tighten, but
not over-tighten, the nuts and bolts.
If you are planning to change the blades yourself, use thick work gloves and take
extreme care at all times. A full range of parts is available from your Authorised
Sanli Dealer.
Technical specifications.
Model number
SSP550
Type of machine
Self-propelled/single speed
Engine
Sanli OHV550 Single Cylinder 4 stroke Air Cooled
Displacement
163cc
Engine max speed
3,250 rpm
Engine power
2.8 kW @ 3100 rpm
Fuel
95 octane regular unleaded
Fuel tank capacity
1 litre
Ignition
Electronic
Spark plug
NGK BPR 6ES
Spark plug gap
0.75mm
Engine oil
SAE30
Engine oil capacity
600ml
Chassis
Heavy duty steel
Cutting width
510cm (20in)
Adjustable cutting heights
10
Grass collection capacity
60 litres
Noise level
75 dB (A)
Weight (including catcher)
40.2kg
Fig. 25
