Liftkar HD I 12
IMPORTANT
Keep pressing the UP/DOWN switch in Single-step mode until the LIFTKAR reaches the next step
and stops automatically. Then release the switch. Pressing the switch again starts the LIFTKAR on
its next movement cycle. If the switch is released by mistake during a cycle, simply press the
UP/DOWN button again to continue the movement. The Liftkar continues operating until it reaches
the end of the cycle and stops automatically. Releasing the button and pressing it again starts the
next climbing cycle.
2.5.3 SPEED SWITCH
Use the speed switch to select higher or lower climbing speeds (
figure 5
).
The lower speed or single-step mode is recommended for beginners, heavy loads and difficult situations.
2.6 UP/DOWN SWITCH ON HANDLEBAR
With an UP/DOWN switch located both on the left and right of the handlebar (
figure 6
), this unit is ideal for both
left- and right-handed operators.
A: UP/DOWN switch
B: DOWN - C: UP
2.7 MAIN SWITCH
The main switch is located on the quick-change battery pack. The power supply to the unit can be switched off
safely using the main switch (
figure E
).
6
