Page 11
2.6 Safety flap
To start tilting a load, it may be necessary to use your foot to assist in tilting. The axle
of the conventional sack truck is normally used for this purpose. With the LIFTKAR
SAL, the swing arm with the support wheels, a wheel, or the drive unit may be used to
support by foot. The safety flap is installed to prevent your foot getting jammed in by
the swing arm. If you press onto the lower part of the flap with your foot all functions
will be stopped.
Safety instructions
You avoid all risk if you switch on only after tilting the load.
2.7 Main switch
The main switch is situated on the battery cover.. The power supply is switched on or
off by way of the main switch.
2.8 Switching off
Battery power is removed:
By switching off the main switch on the battery unit
By removing the battery
By pressing button (P) for 3 seconds
Automatically after 10 minutes
The main switch or removal of the battery provide a higher degree of safety
than switching off with the button P or with the timer cut-out, as button P may
be touched inadvertently.
Summary of Contents for Liftkar SAL Uni
Page 2: ...Page 2...
Page 6: ...Page 6 2 Controls 2 1 Model ERGO...
Page 8: ...Page 8 2 3 Model UNI...
