Page 15
4.3.2 Hooking in underneath the step
Under normal operating conditions,
with the load in a well-balanced
position, the moving support arm is
always clear of the underside of the
upper step. If the LIFTKAR is laid back
too far, the support arm will be tripped
by touching the tread it is on, causing
it to rotate under the upper tread. The
electronics will go into overload mode
and will need to be reset.
4.3.3 Overload
Do not overload.
Exceeding the load capacity will activate overload mode causing the operation to stop,
lowering the main wheels slowly to the lower step. The indicator lamp flashes red for
about 3 seconds after which the ascend/descend button will need to be reset.
Once the battery has been discharged the unit will go into overload even with
loads below the specified capacity.
Summary of Contents for Liftkar SAL Uni
Page 2: ...Page 2...
Page 6: ...Page 6 2 Controls 2 1 Model ERGO...
Page 8: ...Page 8 2 3 Model UNI...
