NEO Liftkar SAL I 10
2.6.3 BEEP FEATURE
This is a people warning feature for transports in public areas.
Activating the beeper function: Switch on the stairclimber and press and hold the On/Off button for about 30
seconds until a beep signal sounds. Now, the beep signal remains on while the stairclimber is moving.
Deactivating the beeper function: Switch on the stairclimber and press and hold the On/Off button for about
30 seconds until a beep signal sounds. Now, the stairclimber continues to move without the recurring beep
sound.
2.6.4 SPEED SWITCH
Use the speed switch to select either high or low speed – this can only be used in ascent mode. (In descent
mode the descending speed is permanently set so that optimum braking will always be secured – refer also
chapter
4.2
)
Low speed is advisable for: training, heavy loads and in awkward locations.
Press the speed button for approx. 10 seconds to activate the stair light.
2.7 CHARGING STATUS INDICATOR
1: Activation button for charging status - 2: LED indicator - 3: Visualisation
Pressing the activation button switches on the LED charge level indicator; if all five LEDs light up, the quick-
change battery is 100% charged.