NEO Liftkar SAL I 13
4 OPERATION
4.1 ASCENDING STAIRS
Insert the battery and press the ON/OFF button until it is constantly green.
The LIFTKAR is now in the UP MODE.
Pressing the Up button in the upper handle, will operate the support wheels and will lift the LIFTKAR over the
step continuing until the button is released.
IMPORTANT
On each cycle, immediately the main wheels rest on the tread, pull the LIFTKAR back to touch the
rise of the next step up.
Holding the LIFTKAR too flat, on stairs with open risers, can also result in the support wheels
being partially trapped under the tread. This may result in excessive pressure on the drive unit,
causing it to go into overload mode, and shutting down. (Reset by pressing the ON/OFF button).
4.2 DESCENDING STAIRS
Insert battery, if not already done. Press the ON/OFF button. Use the Up/Down button to switch to Down mode.
The LIFTKAR is now in the DOWN-MODE and the support wheels will move to the descend position automatically
(see
drawing
).
The ascending button is now out of function.
A: Descend position
