Sanosil Q-Jet Compact
6
2.6
Disclaimer
Sanosil declines any claims for damages or warranty claims if:
•
The product is used for any other purpose but the ones stated in this Operation Manual.
•
Regulations, standards or instructions in this Operation Manual are not adhered to.
•
The product is modified or transformed in any manner.
•
The product is not repaired by an authorized dealer and is used with other but the original spare parts provided by
Sanosil Ltd.
•
The product is used despite obvious safety faults or recognizable damages.
•
The product was exposed to mechanical tappets or has been dropped.
•
Accessories are used which are not supplied nor specifically authorized by Sanosil Ltd.
2.7
Room Disinfecting with the Sanosil Q-Jet Fogger
How to use the Sanosil Q-Jet Compact:
Fogging of Sanosil Disinfectants (only use Sanosil ready for use products containing up to 7.5% hydrogen Peroxide) can be
used for disinfecting hard, nonporous surfaces in rooms as an adjunct following regular cleaning and disinfecting of room
surfaces. Sanosil ready to use products are recommended for use in fogging operations as a supplemental measure after
regular cleaning and disinfecting procedures. Pre-cleaning protocol defined by healthcare facility. If other
cleaning/disinfecting products then Sanosil products are used, surfaces MUST BE DRY before fogging. The more thorough
the surfaces are cleaned beforehand, the more effective the adjunct disinfection treatment will be.
Areas should be cleaned daily, after a contamination has been detected, or on an as needed basis depending on the
volume of traffic and use.
•
Users should familiarize themselves with Q-Jet operation by reading the Q-Jet User Manual prior to first use.
It is essential that Q-Jet users follow all safety warnings as detailed in this operating manual.
•
It is recommended that users read the entire document before proceeding with room disinfecting treatment.
2.8
Different ways to use the Sanosil Q-Jet Compact
a. Overnight disinfection (recommended):
Procedure:
Disinfecting process according procedure on page 7, with extended exposure time.
Advantages:
Extended exposure time, maximal disinfection efficacy, hydrogen Peroxide level will lower
automatically
overnight and has to be measured only once on the next day
Disadvantages: Room cannot be used and Sanosil Q-Jet Compact is not available overnight
b. Standard disinfection without additional measures:
Procedure:
Disinfecting process according procedure on page 6 with standard waiting time.
Advantages:
Time consumption: 3-10 hours (depends on the room size, humidity and the decomposition
time of hydrogen peroxide in the treated room), Sanosil Q-jet Compact and room can be re-used faster
Disadvantages: Additional personal and time needed for hydrogen peroxide level measurements
c. Standard disinfection with speed up measures:
Procedure:
Disinfecting process according procedure on page 6 with reduced waiting time.
Advantages:
Time consumption: 3-5 hours (depends on the room size and the taken measures to reduce
hydrogen peroxide level in the treated room), Sanosil Q-Jet and room can be reused faster
Disadvantages: Additional personal and time needed to air room, optionally an additional dehumidifier is
needed, slight risk of new contamination through open windows
