ENGLISH
– ENGLISH – ENGLISH – ENGLISH – ENGLISH – ENGLISH – ENGLISH – ENGLISH
7/
13
Step 1:
Make sure to level the bottom board of the cabin.
Install the back wall with the bottom board and
adjust it. One of the installer right the back wall
and mare sure it is vertically.
Step 2:
Put the left side wall on the left
of the bottom board and use the sunk screw (5×60)
to install it with the the back wall.
Then install the electricity box after finish the installation of
the side board.
Step 3:
Put the bench board and the bench frame as the pic 3
Step 4:
Fix the right side wall with the ST5*60 screw