7
(5) Install the backrest
Screw the backrest to the back panel
(6) Install the front panel
Place the front panel onto the bottom panel, and connect them to the side panels by
buckles.
The cup holders are pre-installed in front panel, make sure them connected well to
side panels
(7) Install the roof panel
1. Place the roof panel onto the assembled panels, and ensure the fitting of
each panels
are connected well.
Note: There are wires from front panel and back panel, stretch them through the holes
in the roof, and make sure no the cables pinched by panels. Otherwise, it will damage
the wires.