INSTRUCTION FOR USING THE SPA OUTDOORPOOL
52
PROGRAMMING INSTRUCTIONS
48
2. FUNCTION SUMMARY
(1)
Constant temperature, preset heater and display and operation of water temperature.
(2)
Three surfing pumps, One circulation pump also, One blower.
(3)
Color of Lights are change & changeless synchronization.
(4)
CD frequency input. Display of radio frequency and storage for 10 channels.
(5)
Display and 87 grades adjustment of volume.
(6)
Long Circulation and Phase of time Circulation cleaning.
(7)
Display and set of 24 hours model.
(8)
Power loss memory for all setting.
(9)
Fahrenheit & Celsiur temperature shift.
(10) Frozen preventing control.
(11) Light of Keys.
(12) Lock of buttons of computer board.
(13) Selection of 110-120VAC or 220-240VAC, And Single-Phase or Three Phase Four line mode
(14) Selection one AC power output when “CD” is working, This is using for DVD or TV.
(15) Selection POWER Controll.
(16) Selection electric current of all load are measure.
B. FIRST USE /ACTIVE / PASSIVE - MANNER
When first turning on the power, the backlight will bright of halt, and the LCD will show the
present time and temperature. It will show “E1” if the sensor is open/short circuit. When part
of radio frequency showed “---”, it indicates that the status of the system is “
Waitting Mode
”,
so as well as the pre-heat and circulation cleaning.
active manner
passive manner
The lock will start work by pressing “
”Button in the status of “Waitting Mode”or no-
pressing operation lasting above 30 minute. In the status of Locked, press the button
“ ” twice, the lock will be unlocked, and the word “LOCKED” will disappear.
The lock will start work by pressing . Button in the status of “Waitting Mode”or no- pressing
operation lasting above 30 minute. In the status of Locked, press the button twice, the lock
will be unlocked, and the word “LOCKED” will disappear.
PROGRAMMING INSTRUCTIONS
48
2. FUNCTION SUMMARY
(1)
Constant temperature, preset heater and display and operation of water temperature.
(2)
Three surfing pumps, One circulation pump also, One blower.
(3)
Color of Lights are change & changeless synchronization.
(4)
CD frequency input. Display of radio frequency and storage for 10 channels.
(5)
Display and 87 grades adjustment of volume.
(6)
Long Circulation and Phase of time Circulation cleaning.
(7)
Display and set of 24 hours model.
(8)
Power loss memory for all setting.
(9)
Fahrenheit & Celsiur temperature shift.
(10) Frozen preventing control.
(11) Light of Keys.
(12) Lock of buttons of computer board.
(13) Selection of 110-120VAC or 220-240VAC, And Single-Phase or Three Phase Four line mode
(14) Selection one AC power output when “CD” is working, This is using for DVD or TV.
(15) Selection POWER Controll.
(16) Selection electric current of all load are measure.
B. FIRST USE /ACTIVE / PASSIVE - MANNER
When first turning on the power, the backlight will bright of halt, and the LCD will show the
present time and temperature. It will show “E1” if the sensor is open/short circuit. When part
of radio frequency showed “---”, it indicates that the status of the system is “
Waitting Mode
”,
so as well as the pre-heat and circulation cleaning.
active manner
passive manner
The lock will start work by pressing “
”Button in the status of “Waitting Mode”or no-
pressing operation lasting above 30 minute. In the status of Locked, press the button
“ ” twice, the lock will be unlocked, and the word “LOCKED” will disappear.
PROGRAMMING INSTRUCTIONS
48
2. FUNCTION SUMMARY
(1)
Constant temperature, preset heater and display and operation of water temperature.
(2)
Three surfing pumps, One circulation pump also, One blower.
(3)
Color of Lights are change & changeless synchronization.
(4)
CD frequency input. Display of radio frequency and storage for 10 channels.
(5)
Display and 87 grades adjustment of volume.
(6)
Long Circulation and Phase of time Circulation cleaning.
(7)
Display and set of 24 hours model.
(8)
Power loss memory for all setting.
(9)
Fahrenheit & Celsiur temperature shift.
(10) Frozen preventing control.
(11) Light of Keys.
(12) Lock of buttons of computer board.
(13) Selection of 110-120VAC or 220-240VAC, And Single-Phase or Three Phase Four line mode
(14) Selection one AC power output when “CD” is working, This is using for DVD or TV.
(15) Selection POWER Controll.
(16) Selection electric current of all load are measure.
B. FIRST USE /ACTIVE / PASSIVE - MANNER
When first turning on the power, the backlight will bright of halt, and the LCD will show the
present time and temperature. It will show “E1” if the sensor is open/short circuit. When part
of radio frequency showed “---”, it indicates that the status of the system is “
Waitting Mode
”,
so as well as the pre-heat and circulation cleaning.
active manner
passive manner
The lock will start work by pressing “
”Button in the status of “Waitting Mode”or no-
pressing operation lasting above 30 minute. In the status of Locked, press the button
“ ” twice, the lock will be unlocked, and the word “LOCKED” will disappear.
C.
SETTING THE TIME
In the status of
“Waitting Mode”
and the pre-heater and circulation cleaning are shut down,
pressing or could start time setting. Signal of “:” doesn’t flash but Minute and Hour
flash at this time. It will add 1 hour when pressing each time, and the hours could be added
continually when pressing the without stop. The hour adjustment range is 0~23. In the status
of time setting, It will add 1 minute when pressing each time, and the minutes could be added
continually when pressing the without stop. the minute adjustment range of the minute is:
0~59. The system will quit the time-setting status automatically after 6 seconds without pressing.
D.
FILTERING AND CLEANING
You have the option to set ones a day filtering in the pool, but it can also be all the time on. To set
a ones a day filtering then press in passive manner, then press or to set the
start time of the filtering.
Then press . Now you can use the or
button to set the duration of the filtering.
The maximum filter time is 19 hours and 55 minutes! To exit settings, press
to prevent your
filter settings from being saved. However, if you press , your filtering settings will be saved.
When you have saved the settings a filtering sign appears on the screen.
When the clock you set for filtering appears, the circular pump turns on and the water cleaning
starts. It does not matter if the operation is in active or passive mode, the cleaning is switched on
in each case.
The screen shows the cleaning time, which is counting down. In the initial 30 seconds of cleaning
a jet massage pump is also active to purify the inlet and outlet pipes of the pool. In the first 59
seconds of cleaning, this procedure can not be interrupted. After 1 minute by pressing you
can cancel filtering.
3
CYCLE
MHz/CH
SET
3
CYCLE
Summary of Contents for SanoSpa SPA08
