Sanotechnik TR20, Mounting And Using Instructions

ENGLISH – ENGLISH – ENGLISH – ENGLISH – ENGLISH  – ENGLISH -   

Remote control Radio 

Instruction for radio: 

1.

Plug it in

2.

Press the “switch” key to switch on the control power supply

3.

press the “floodlight” key, the indicator will light and the floodlight will work. Repress to turn off

4.

Press the “fan” key, the indicator will light and the fan will start to work. Repress to turn off the fan

5.

Press the “radio” key to turn on the FM radio, and the indicator will light. Then press the “tune” key, the radio
will make automatic tuning from the low frequency end to the high frequency end. When it searches any
radio, it will stop at that frequency band. When it searches to the high end (108,8MHz)

6.

You should press the “reset” key to turn it to be the low end (88MHz). Then press the “tune” key, the radio will
begin to make automatic tuning from the low end to the high end again: repress the “radio” key to turn off the
radio.

7.

Press the “Volume up or down” key to adjust the volume and the level indicators changes accordingly.

8.

press “switch” key after use to power it off.

Safety Guideless: 

1.

the computer panel should be installed by the qualified instruction person

2.

the electrical parameters of the product should conform to the relevant national standards.

3.

the voltage of the power supply is AC 230+/-10%

4.

please power off the control after each use . Unplug it when it will not be used for a long time.

5.

the leakage protection device must protection device must be provided by the user.

NOTE: Without the permission of the manufacturer. The controller will not be guaranteed for any

Damage resulting from the alteration of circuit or connection of electrical equipments

.

– 11 –