02-2014
VERONA RS
Istruzioni per l’uso e la manutenzione
IT
19 / 29-IT
PREINF. ON SEC
ESPRESSO 3.0
A
•
Premendo i tasti “+” o “-” è possibile impostare nel
campo “A” il tempo in secondi di preinfusione (il
tempo impostabile da 3 a 5 sec) quindi premere il
tasto “√” per confermare la scelta; in successione
si visualizzeranno le videate relative alle varie
erogazioni dove sarà necessario impostare il tempo
di preinfusione.
Nel campo “B” nelle videate successive si visual-
izzerà il tipo di erogazione;
ESPRESSO = un caffè espresso
CAFFE = un caffè lungo
2 ESPRESSO = due caffè espressi
2 CAFFE = due caffè lunghi
•
Effettuata la programmazione del tempo di prein-
fusione, dopo aver premuto il tasto “√” sull’ultima
videata per confermare il dato impostato, si ritorna
automaticamente alla videata principale di program-
mazione.
Lavaggio gruppi erogatori
•
Premendo il tasto (8) si avvia il lavaggio automatico
contemporaneo di tutti i gruppi erogatori.
IMPORTANTE: prima di premere il
tasto (8) preparare la macchina al
lavaggio automatico come descritto
nel relativo paragrafo “ LAVAGGIO
AUTOMATICO GRUPPI”.
Scaldatazze; ON/OFF e impostazione potenza
resistenza
•
Premendo il tasto (9) è possibile abilitare o dis-
abilitare il funzionamento dello scaldatazze; si
visualizza la seguente videata:
SCALDATAZZE
ABILITATO
A
•
È possibile “ABILITARE” o “DISABILITARE” la re-
sistenza dello scaldatazze agendo sui tasti “+” o “-”
quindi premere il tasto “√” per confermare la scelta;
se si abilita il funzionamento della resistenza d si
visualizza la seguente videata:
SCALDATAZZE
50 %
A
•
In questa videata è possibile impostare nel campo
“A”, agendo sui tasti “+” o “-”, la potenza in % della
resistenza.
Si consiglia di impostare 50%, per confermare il
dato e ritornare alla videata principale di program-
mazione premere il tasto “√”
Luci
•
Premendo il tasto (10) si visualizza la seguente
videata:
LED IDLE
ABILITATO
A
•
Selezionare sul campo “A” ABILITATO per accen-
dere le luci o DISABILITATO per spegnerle, quindi
premere il tasto “√” per confermare la scelta e
ritornare alla videata principale di programmazione.
Uscita dalla fase di programmazione
•
Premendo il tasto (11) si esce dalla fase di pro-
grammazione di programmazione e si ritorna alla
videata principale del display.
Rimando alla pagina precedente
•
Premendo il tasto (12) si ritorna alla prima pagina
di programmazione.