02-2014
VERONA RS
EN
Instructions for use and maintenance
19 / 29-EN
•
After programming the pre-infusion time, press
the “√” button on the last screen to confirm the set
value, then the display automatically returns to the
main programming screen.
Washing dispensing units
•
Press button (8) to start the automatic washing of
all dispensing units at the same time.
WARNING: before pressing button
(8) prepare the machine for auto-
matic washing as described in the
relevant “UNIT AUTOMATIC WASH-
ING” paragraph.
Cup heating plate; ON/OFF and setting the power
of the heating element
•
Press button (9) to enable or disable the operation
of the cup heating plate; the following screen is
displayed:
SCALDATAZZE
ABILITATO
A
•
The cup heating plate can be “ENABLED” or “DIS-
ABLED” by operating on the “+” or “-” buttons, then
press the “√” button to confirm the selection; if the
operation of the heating element is selected, the
following screen is displayed:
SCALDATAZZE
50 %
A
•
The % of power of the heating element can be set
in this screen in field “A”, using the “+” or “-” buttons.
We recommend setting this value to 50%, then
press the “√” button to confirm the value and return
to the main programming screen.
Lights
•
Press button (10) to display the following screen:
LED IDLE
ABILITATO
A
•
In field “A”, select ENABLED to turn the lights on
or DISABLED to turn them off, then press the “√”
button to confirm the selection and return to the
main programming screen.
Quit the programming stage
•
Press button (11) to quit the programming stage
and return to the main display screen.
Move to the previous page
•
Press button (12) to return to the first programming
page.
