35
Display
symbol
Name
Setting range
Incremen
t
Unit
Default
value
Changeabl
e during
operation
(proportional) signal
E
Soft-start time
0.0
to
300.0
0.1
s
0.5
✓
C
Current limit
amount
10
to
110
1
%
110
✓
U
Heater
disconnection
amount
5
to
50
1
%
50
✓
d
Delay time
0.0
to
3.0
0.1
s
0.0
✓
t
Period
1.0
to
3.0
0.1
s
1.0
✓
n
Function
characteristics
0
to
7
1
No.
0
✗
↑
(“during operation”... the operation status LED is ON or flashes,
i.e. output is generated.)
Parameter overview
P: Temperature control signal
One of the output setting signals, this signal functions in the same way as the “+,” “S,”
and “–” terminals on the control terminal block. If [F2 P: Priority setting] is set to [0: Control
terminal block], the value set with the temperature controller can be checked when this item
is selected If [F2 P: Priority setting] is set to [1: Panel] or [2: Communication], the value can
be set via the panel or communication as a substitute for the temperature controller.
H: Manual (upper limit) signal
One of the output setting signals, this signal functions in the same way as the “VH2”
terminal on the control terminal block. If [F2 H: Priority setting] is set to [0: Control terminal
block], the value set with the variable resistor can be checked when this item is selected. If
[F2 H: Priority setting] is set to [1: Panel] or [2: Communication], the value can be set via the
panel or communication as a substitute for the variable resistor input.
L: Lower point (lower limit) signal
One of the output setting signals, this signal functions in the same way as the “VL2”
terminal on the control terminal block. If [F2 L: Priority setting] is set to [0: Control terminal
block], the value set with the variable resistor can be checked when this item is selected. If
[F2 L: Priority setting] is set to [1: Panel] or [2: Communication], the value can be set via the
panel or communication as a substitute for the variable resistor input.
Summary of Contents for CALPOTE UG Series
Page 94: ...94 APPENDIX B PANEL TRANSITION DIAGRAM...
Page 96: ...MEMO...
