30
7
DISPLAY PANEL
7.1
Names and Overview of the LED Lamps and Keys
RUN/STOP
key
Starts or stops the output. However, the external
terminals (ST–PH) take priority over this key. See the
explanation about the ST terminal in “5.1 Control
MODE key
Switches the display mode.
MONITOR → FUNCTION → PARAMETER → OPTION
ENTER key
Proceeds to the next item.
(1)
Power receiving
LED
This LED turns ON when power
is supplied to the control circuit.
(2)
Error LED
This LED turns ON when an
error occurs.
(3)
Operation
status LED
This LED is ON during operation.
It flashes while an error is
occurring during operation.
It turns OFF when operation
stops, including stops due to
errors.
(4)
Mode LEDs
The LED of the current screen
mode turns ON.
(5)
Setting change
LED
This LED is ON during Setting
mode.
(6)
Communication
LED
This LED is ON during operation
of the optional communication
function.
(7)
Phase
indication LEDs
For the UG1 units, these LEDs
are always OFF.
(8)
7seg LED
Displays each mode or function
with numeric values. When an
error occurs, its code is also
displayed here.
(9)
Unit LEDs
The unit corresponding to the
values displayed on the
7seg LED turns ON.
Summary of Contents for CALPOTE UG Series
Page 94: ...94 APPENDIX B PANEL TRANSITION DIAGRAM...
Page 96: ...MEMO...
