55
8.4
Er.07: CPU Error
Detection
condition:
An abnormality has occurred in the CPU system.
When
detected:
The output stops.
Clearing
method:
Stop the power supply and contact us.
8.5
Er.08: Memory Error
Detection
condition:
An abnormality has occurred in data containing parameter information.
When
detected:
The output stops.
Clearing
method:
Stop the power supply and contact us.
8.6
Er.09: Emergency Stop
Detection
condition:
The circuit between GT and PH on the control terminal block has opened.
When
detected:
The output stops.
Clearing
method:
Short-circuit GT with PH on the control terminal block.
8.7
Er.10: Power Supply Voltage Drop
Detection
condition:
The control power supply voltage has dropped.
When
detected:
The output stops.
Clearing
method:
Adjust the control power supply voltage so that it falls within the unit
’
s
specifications.
8.8
Er.11: Instantaneous Voltage Drop
Detection
condition:
The control power supply voltage has instantaneously stopped or dropped.
(This error is also temporarily displayed when the power supply is stopped.)
When
detected:
The output stops.
Clearing
method:
This error is cleared when the control power supply voltage returns to the
normal level.
Summary of Contents for CALPOTE UG Series
Page 94: ...94 APPENDIX B PANEL TRANSITION DIAGRAM...
Page 96: ...MEMO...
