background image

INTRO, PROGRAM & RANDOM PLAY 

 

INTRO 

Plays the first 10 seconds of each track on the disc. 

1.  In STOP mode press the MODE button three times,  

INTRO is displayed. 

2.  Press         button to start INTRO play from track number 01. 

3.  If INTRO mode is selected during play, INTRO will start flashing in the display. 
 

Press        button. INTRO stops flashing and INTRO play starts from track 01. 

Press        to start INTRO play from next track. 

Press        twice to start INTRO play from previous track. 

To cancel INTRO play, press        button again. Playback starts from current 
track. 

PROGRAM 

This allows the selected tracks on the disc to be played in any desired order 
 

NOTE:

 Programs can be set either in the play mode or in the STOP mode. 

 
1.  Press the PROG button when the unit is in the stop 

mode. 
The track number “00” will appear in the display 

with the            indicator flashing.     

2.  Press          or          to select the desired track. 

3.  Press the PROG button to enter the track into the 

memory. Track number returns to “00” and program 

channel No. changes to 02. 

4.  Repeat step 2 and 3 to program up to 20 tracks 

into the memory. 

5.  Press         to start the programmed play. 

6.  To erase the program, press the     STOP button 

twice once in STOP mode. 

 

RANDOM 

Enables all the tracks on a disc to be played in a Random sequence. 
1.  In STOP mode press the MODE button four times,  

 

2.   Press        button. A track is selected at random and  

will begin to play. 

3.   If RANDOM mode is selected during play, RAND will start flashing in the display. 

Press         or          button. RAND stops flashing and RANDOM  

playback begins. 

 

4.   Press MODE Button again to return to normal play mode. 
 

10

ESP

ESP

ESP

Summary of Contents for Hello Kitty KT2038















Reviews: